Instantaneous reduction of inkjet-printed graphene oxide on PVDF nanofibers for high-performance ultralight flexible supercapacitors

Abstract

As the demand for innovative electronic devices continues to grow, flexible electronic products which offer a solution capable of adapting to various shapes and deformations, are increasingly gaining prominence. This study innovatively uses electrospun polyvinylidene fluoride (PVDF) nanofibers as substrates and employs reactive inkjet printing (RIP) technology to deposit and instantaneously reduce graphene oxide (GO), fabricating ultralight flexible all-solid-state supercapacitors. To verify that PVDF nanofibers as substrates can facilitate the uniform deposition of GO ink during inkjet printing and prevent the dispersion of GO into the internal structure, thereby achieving good capacitive performance with the fewest layers of printing, this study analyzes and compares the capacitive performance differences among 1rGO/PVDF, 3rGO/PVDF, and 5rGO/PVDF samples. The results have been confirmed that the GO ink was effectively instantaneously in-situ reduced by l-ascorbic acid (AA) to rGO by RIP system, and the specific capacitance of 1rGO/PVDF electrode was founded of 83.29 F/g at a current density of 2 A/g from the GCD analysis with a corresponding energy density of 7.5 Wh kg−1 and power density of 1.04 kW kg−1. The 1rGO/PVDF supercapacitor exhibits excellent electrochemical stability, maintaining 93 % efficiency after 4000 charge-discharge cycles at a current density of 2 A/g.