Abstract
The purpose of this study is to investigate the response of the precipitates against irradiation in F82H steels which are considered as main candidate structure material for the fusion DEMO reactor blanket. M23C6-type precipitates contained F82H-IEA steel, and MX- and M23C6-type precipitates contained F82H-BA12 steel were selected as experimental specimens. Iron irradiation at 673 K using ion accelerator was performed on both steels up to 50 dpa. After irradiation, the instability behavior of precipitates was characterized using transmission electron microscopy. It is found that in F82H-IEA specimens, the number density of radiation defects at 20 dpa was 3.26 × 1021 m−3, and the amorphization of M23C6 was undetected up to 50 dpa. Although Ostwald ripening occurred in M23C6 precipitates, the average size of M23C6 mildly decreased with irradiation dose within this study. For F82H-BA12 specimens, the shrinkage rate of MX- and M23C6-type precipitates was estimated respectively as 0.06 and 0.03 nm/dpa. Hence, the MX and M23C6-type precipitates in F82H steel exhibit an excellent irradiation resistance under the present irradiation condition. Moreover, the behaviors like amorphization and weakening in contrast were not observed in M23C6 precipitates in both specimens, which is different from electron irradiation, presumably due to the factors such as different damage rate.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
