Instability Mechanism and Control Countermeasure of a Cataclastic Roadway Regenerated Roof in the Extraction of the Remaining Mineral Resources: A Case Study

Abstract

Most accessible mineral deposits are nearly exhausted. Consequently, some resources that were previously abandoned are now being considered for remining. This paper describes a case study that aims at revealing the instability mechanism and selecting the optimal control countermeasures for a cataclastic roadway regenerated roof (CRRR) during the extraction of the remaining mineral resources. Based on the structural model of a cataclastic regenerated roof (CRR) of a remaining lower slice, a modified natural arch mechanical model for a CRRR was established by considering the lateral pressure and stress concentration coefficient of the bearing arch, through which the modified bearing arch curve equation and arch rise expression were deduced. The relationship between the modified arch rise and the lateral stress was obtained through a practical case. Next, a numerical model of a CRRR, which accounted for the cataclastic features, was built in the Universal Distinct Element Code (UDEC). The development of subsidence and fractures in the roadway roof was determined through modeling under various roof support scenarios, namely no support, rock bolt (RB) support, rock bolt and cable (RBC) support and a combined support of the rock bolt, cable and steel beam (RBCS). The theoretical analysis, numerical simulation and monitoring results of the RB and RBC stress all indicated that a bearing arch existed in the CRRR and that the arch rise underwent changes during the roof hanging time and with different support scenarios. The support structure should exceed the bearing arch rise in height and should be leak proof to avoid roof leakage. After a comparative analysis of the numerical and field support effects provided by various supporting scenarios, the RBCS support scenario was shown to be the optimal roof support choice, providing a good controlling effect for a CRRR and meeting the production requirements.