Abstract

This paper presents measurements of the instability and transition processes in separation bubbles under a three-dimensional freestream pressure distribution. Measurements are performed on a flat plate upon which a pressure distribution is imposed by a contoured surface facing the flat test surface. The three-dimensional pressure distribution that is established on the test surface approximates the pressure distributions encountered on swept blades. This type of pressure field produces crossflows in the laminar boundary layer upstream of separation and within the separation bubble. The effects of these crossflows on the instability of the upstream boundary layer and on the instability, transition onset and transition rate within the separated shear layer are examined. The measurements are performed at two flow Reynolds numbers and relatively low level of freestream turbulence. The results of this experimental study show that the three-dimensional freestream pressure field and the corresponding redistribution of the freestream flow cause significant spanwise variation of the separation-bubble structure. It is demonstrated that the instability and transition processes in the modified separation bubble develop on the basis of the same fundamentals as in two-dimensional separation bubbles, and can be predicted with the same level of accuracy using models that have been developed for two-dimensional separation bubbles.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.