Abstract
As a fixed reservoir rock property, pore throat size distribution (PSD) is known to affect the distribution of reservoir fluid saturation strongly. This study aims to investigate the relations between the PSD and the oil–water relative permeabilities of reservoir rock with a focus on the efficiency of surfactant–nanofluid flooding as an enhanced oil recovery (EOR) technique. For this purpose, mercury injection capillary pressure (MICP) tests were conducted on two core plugs with similar rock types (in respect to their flow zone index (FZI) values), which were selected among more than 20 core plugs, to examine the effectiveness of a surfactant–nanoparticle EOR method for reducing the amount of oil left behind after secondary core flooding experiments. Thus, interfacial tension (IFT) and contact angle measurements were carried out to determine the optimum concentrations of an anionic surfactant and silica nanoparticles (NPs) for core flooding experiments. Results of relative permeability tests showed that the PSDs could significantly affect the endpoints of the relative permeability curves, and a large amount of unswept oil could be recovered by flooding a mixture of the alpha olefin sulfonate (AOS) surfactant + silica NPs as an EOR solution. Results of core flooding tests indicated that the injection of AOS + NPs solution in tertiary mode could increase the post-water flooding oil recovery by up to 2.5% and 8.6% for the carbonate core plugs with homogeneous and heterogeneous PSDs, respectively.
Highlights
Residual oil remains in the reservoirs after conventional water flooding is often regarded as the target for enhanced oil recovery (EOR) processes
The calculated flow zone indices (FZI) for cores A1 and A2 were 0.52 and 0.56, respectively, which indicates that the two samples have similar FZI; they are classified into the same rock type or hydraulic flow unit (HFU) [51,54,55]
The results of zeta potential and dynamic light scattering (DLS) tests confirmed the synergy of alpha olefin sulfonate (AOS) surfactant and silica nanoparticles
Summary
Residual oil remains in the reservoirs after conventional water flooding is often regarded as the target for enhanced oil recovery (EOR) processes. Wardlaw et al presented a low-cost method for estimating the amount of residual oil in a carbonate reservoir based on the observational evaluation of rock sections and pore casts [6]. They stated that the oil recovery increases with the pore-to-throat diameter ratio, this hypothesis is yet to be tested experimentally. Elgaghah et al considered the influence of pore size distribution (PSD) on the displacement efficiency in oil-bearing reservoirs [9] They employed the image processing technique to find the pore size distribution of the rock samples in order to design the optimum microbial EOR process regarding the PSD of the porous media
Sign-in/Register to view highlights & summary 
Published Version (
Free)
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
