Abstract

Oil-based cuttings (OBCs) produced during shale gas exploration are classified as hazardous waste, and are difficult and expensive to dispose of. Appropriate disposal of such OBCs has become a key issue requiring urgent attention. Here, we have applied surfactant-free microemulsions (SFMEs) to deoil OBCs. The deoiled OBCs, the recovered SFMEs, and the base oil have been characterized. Studies have shown that gentle stirring and mixing of n-hexane/tert-butanol/water (30:65:5 wt%) can form a cleaning agent that serves as an SFME. The oil content of the OBCs after deoiling by SFMEs was less than 1%, and the remaining solid phase showed no hazardous characteristics. The optimum conditions for cleaning OBCs with the SFME have been identified as 30–35 °C, a duration of 20 min, a solid–liquid mass/volume ratio of 1:4, and a stirring speed of 200 rpm. Thereafter, samples are optimally dried at 100 °C for 50 min. The recovered cleaning agent can be reused efficiently. The recovered base oil was essentially unchanged, except for some contamination with organic additives from the oil-based mud. The deoiling mechanism of OBCs with an SFME mainly depends on the strong solubilization ability of the SFME.

Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.