Insight into the formation of polychlorinated dibenzo-p-dioxins and dibenzofurans in hazardous waste incineration and incinerators: Formation process and reduction strategy

Abstract

Incineration technology has been widely adopted to safely dispose of hazardous waste (HW). While the incineration process causes the formation of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs). Due to its extreme toxicity, many scholars have been committed to determining the PCDD/F formation process and reducing emissions in incinerators. Previous studies ignored the impact of incineration and fluctuation of feeding materials on PCDD/F formation in hazardous waste incinerators (HWIs). In this study, differences in PCDD/F formation between HWIs and municipal solid waste incinerators (MSWIs) were pointed out. The incineration section in HWIs should be carefully considered. Laboratory experiments, conventional analysis and thermogravimetry experiments were conducted. An obvious disparity of PCDD/F formation between 12 kinds of HWs was found. Distillation residue was found with remarkably higher PCDD/F concentrations (11.57 ng/g). Except for the Cl content, aromatic rings and C–O bond organics were also found with high correlation coefficients with PCDD/F concentrations (>0.92). And PCDD/Fs were formed through a chlorination process and structure formation process. All of these are helpful to further understand the PCDD/F formation process during HW incineration, optimize the operation conditions in HWIs and reduce the emission pressure of PCDD/Fs in the future.