Inside Front Cover: Nanocrystalline TiO2 Photocatalytic Membranes with a Hierarchical Mesoporous Multilayer Structure: Synthesis, Characterization, and Multifunction (Adv. Funct. Mater. 8/2006)

Abstract

AbstractThe inside cover shows a hierarchical, mesoporous, multilayer TiO2 photocatalytic membrane synthesized via a novel sol–gel dip‐coating process employing surfactant templates reported by Dionysiou and co‐workers on p. 1067. The resulting asymmetric mesoporous TiO2 membrane supported onto a porous Al2O3 substrate exhibited hierarchical changes in pore diameter and materials porosity from the top to the bottom layer. The TiO2 membrane has multiple simultaneous functions, including photocatalysis, disinfection, separation, and anti‐biofouling.A novel sol–gel dip‐coating process to fabricate nanocrystalline TiO2 photocatalytic membranes with a robust hierarchical mesoporous multilayer and improved performance has been studied. Various titania sols containing poly(oxyethylenesorbitan monooleate) (Tween 80) surfactant as a pore‐directing agent to tailor‐design the porous structure of TiO2 materials at different molar ratios of Tween 80/isopropyl alcohol/acetic acid/titanium tetraisopropoxide = R:45:6:1 have been synthesized. The sols are dip‐coated on top of a homemade porous alumina substrate to fabricate TiO2/Al2O3 composite membranes, dried, and calcined, and this procedure is repeated with varying sols in succession. The resulting asymmetric mesoporous TiO2 membrane with a thickness of 0.9 μm exhibits a hierarchical change in pore diameter from 2–6, through 3–8, to 5–11 nm from the top to the bottom layer. Moreover, the corresponding porosity is incremented from 46.2, through 56.7, to 69.3 %. Compared to a repeated‐coating process using a single sol, the hierarchical multilayer process improves water permeability significantly without sacrificing the organic retention and photocatalytic activity of the TiO2 membranes. The prepared TiO2 photocatalytic membrane has great potential in developing highly efficient water treatment and reuse systems, for example, decomposition of organic pollutants, inactivation of pathogenic microorganisms, physical separation of contaminants, and self‐antifouling action because of its multifunctional capability.