Insect Wing Buckling Influences Stress and Stability During Collisions

Abstract

Abstract Flapping insect wings collide with vegetation and other obstacles during flight. Repeated collisions may irreversibly damage the insect wing, thereby compromising the insect's ability to fly. Further, reaction torques caused by the collision may destabilize the insect and hinder its ability to maneuver. To mitigate the adverse effects of impact, some insect wings are equipped with a flexible joint called a “costal break.” The costal break buckles once it exceeds a critical angle, which is believed to improve flight stability and prevent irreversible wing damage. However, to our knowledge, there are no models to predict the dynamics of the costal break. Through this research, we develop a simple model of an insect wing with a costal break. The wing was modeled as two beams interconnected by a torsional spring, where the stiffness of the torsional spring instantaneously decreases once it has exceeded a critical angle. We conducted a series of static tests to approximate model parameters. Then, we used numerical simulation to estimate the reaction moments, angular impulse, and peak stresses experienced by the wing during a collision. When evaluated over the duration of an external load, we found that buckling could reduce reaction moments and angular impulse up to 82% and 99%, respectively, compared to a homogeneous wing. This suggests the costal break can enhance flight stability. On the other hand, buckling maximally increased peak stresses two times compared to a homogeneous wing, indicating the costal break does not reduce likelihood of damage under the simplified loading considered.