Inorganic pigments made from the recycling of coal mine drainage treatment sludge

Abstract

Continuous industrial development increases energy consumption and, consequently, the consumption of fossil fuels. Coal mineral has been used in Brazil as a solid fuel for thermoelectric generators for several years. However, coal exploitation affects the environment intensely, mainly because Brazilian coal contains excess ash and pyrite (iron disulfide). According to the local coal industry syndicate, the average annual coal run per mine is 6 million ton/year; 3.5 million ton/year are rejected and disposed of in landfills. Besides pyrite, Brazilian coal contains Mn, Fe, Cu, Pb, Zn, Ge, Se, and Co. Additionally, the water used for coal beneficiation causes pyrite oxidation, forming an acid mine drainage (AMD). This drainage solubilizes the metals, transporting them into the environment, making treatment a requirement. This work deals with the use of sedimented residue from treated coal mine drainage sludge to obtain inorganic pigments that could be used in the ceramic industry. The residue was dried, ground and calcined (∼1250 °C). The calcined pigment was then micronized ( D 50∼2 μm). Chemical (XRF), thermal (DTA/TG), particle size (laser), and mineralogical (XRD) analyses were carried out on the residue. After calcination and micronization, mineralogical analyses (XRD) were used to determine the pigment structure at 1250 °C. Finally, the pigments were mixed with transparent glaze and fired in a laboratory roller kiln (1130 °C, 5 min). The results were promising, showing that brown colors can be obtained with pigments made by residues.