In-Line Integration of Sensors in Thermoplastic Composite Structures Using Novel Continuous Orbital Winding Technology

Abstract

Currently there is a great demand for energy and resource efficient and also function integrating manufacturing processes. Therefore, suitable technologies and corresponding foundational researches are being pursued in the federal cluster of excellence “MERGE Technologies for Multifunctional Lightweight Structures” at the Technische Universität Chemnitz. A part of this project is the development of the continuous orbital winding (COW) technology including the goal of a large-scale process used for special fiber-reinforced thermoplastic semi-finished products. This method is an inverted winding process. The winding core needs to perform only the feed motion. Furthermore, this allows synchronization to upstream and downstream process chains.Due to the modular structure of the machine concept, it is possible to integrate a sensor system during production without interrupting the process. For this purpose, a textile carrier tape with integrated electrically conductive fibers and applied sensors is embedded. Various silicon sensors, e.g. acceleration, pressure or stress sensors are applied by micro-injection molding. A so-called “interposer” is used as an electrically adapter between the microstructures of the sensor system and the mesostructures of the textile.In this article, basic investigations for the continuous processing of semi-finished thermoplastic structures and the integration of sensors are presented. It is intended to determine the bonding properties, possible structural thickening by the sensors and the resistance of the sensor systems and its electronic components to the process conditions.In summary, investigations are carried out to determine the parameters of the machine system as well as to determine the optimum processing conditions for the application of additional elements.