Abstract
This paper presents the fabrication of an inkjet-printed multilayer bandpass filter using the liquid crystal polymer (LCP) system-on-package (SOP) technology. The LCP-SOP technology adopted by lamination bonding process reduces the occupied area of a device and is suitable for radio frequency (RF) package applications. The surface morphologies and RF performance of the inkjet-printed silver film on an LCP substrate after the lamination bonding process, which entails applying high temperatures and pressures, were observed and analyzed. Acceptable performance of the inkjet-printed silver film of an optimal lamination bonding condition was 0.69 MPa at 270 °C. Using the inkjet-printing and LCP-SOP technologies, a miniature bandpass filter was created with a minimal $S_{21}$ value and a maximal $S_{11}$ value of −1.5 and −17.4 dB at 10.6–14.5-GHz passband, respectively. A strain effect of silver line and bandpass filter was also analyzed. The results demonstrated the effectiveness of the proposed design methodology and the fabrication technique.
Sign-in/Register to access full text options 
Free) 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call
