Abstract
This paper presents a new temperature sensor, inkjet-printed with the in-house developed hybrid rGO/Ag nanoparticles ink (rGO/AgNPs ink). Its performance is studied, and the results indicate that its sensitivity is better than the commercial sensor. The meander—shaped electrodes were fabricated using drop-on-demand inkjet printer (Fujifilm Dimatix 2850 printer) on polyethylene terephthalate (PET) substrate. Compared to the sensitivity 0.0543 ?/oc of the sensor developed with commercial ink, the in-house developed sensor shows higher sensitivity 0.1086 ?/oc. Besides, the printed sensors exhibit its resistance increasing linearly with temperature from 30°C to 100°C. The bending tests results also prove that the characteristics of the sensors do not vary significantly, indicating excellent mechanical stability and flexibility. Therefore, the flexible inkjet-printed temperature sensor with the in-house hybrid rGO/AgNPs ink is recommended for the large-scale productions and implementations.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
