Abstract
The effects of typical dry powder fire extinguishing agents (DPFEA) on the CO oxidation catalysts were carried out. Cu-Mn-Ce-O composite catalyst (CuMn/Ce) for CO oxidation in loose contact with two typical components of DPFEA (NH4H2PO4 and NaHCO3) was tested to evaluate the performance of CO removal. The CO catalytic activities mixed by NaHCO3 are worse than those mixed by NH4H2PO4 at the same mixing ratios, which may be caused by the lower temperature range of NaHCO3 decomposition and the masked catalyst surfaces by CO2 and H2O released by NaHCO3. Further, the NaHCO3 resistance approach was proposed by introducing rare earth metal dopants (La, Sm and Ho) or coupling an alkaline sorbent (LiOH). Among all rare earth metal dopants, Sm is most appropriate for enhanced NaHCO3 resistance of CuMn/Ce catalyst. And 20 wt% LiOH-CuMn/Ce shows the best capacity for NaHCO3 resistance, as evidenced by the excellent CO catalytic performance similar to pure CuMn/Ce.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
