Abstract
The poor corrosion/wear resistance of Mg alloy seriously limits its industrial application. Graphene-based anti-corrosion coatings show the excellent imperviousness, but they can provide the additional cathodic sites for Mg alloys, which accelerates the galvanic corrosion behaviors near the interfaces. A novel design of cerium-based intermediate layer (Ce(Ⅳ)) is reported in this study, which exhibits a synergistic effect of hydrogen/ionic bond on the graphene oxide (GO)/polyvinyl alcohol (PVA) biomimetic coating. It overcomes the problems of galvanic corrosion and low interfacial adhesion between Mg substrate and hybrid coating through a prominent barrier effect. Furthermore, the GO/PVA coating with “bricks and mortar” structure effectively blocks the permeation of electrolyte due to the reduced porosity and enhanced densification. The corrosion rate of Ce(Ⅳ)/GO/PVA coating is 11 and 19 times lower than bare Mg alloy and single GO/PVA film, respectively. The wear rate of GO/PVA and Ce(Ⅳ)/GO/PVA samples is decreased by 98.8% and 97.6%, which is ascribed to the high hardness and lubrication of GO sheets. Moreover, the relatively interlayer slipping between GO sheets can lubricate the sliding process. Compared with GO/PVA, the slightly decreased wear resistance of Ce(Ⅳ)/GO/PVA coating is resulted from the enhanced shear force.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
