Abstract
Depletion mode InGaAs microwave power MISFETs with 0.7 mu m gate lengths and 0.2 mm gate widths have been fabricated using an epitaxial process. The devices employed a plasma deposited silicon dioxide gate insulator. The RF power performance at 18 GHz, 20 GHz, and 23 GHz is presented. An output power density of 1.04 W/mm with a corresponding power gain and power-added efficiency of 3.7 dB and 40%, respectively, was obtained at 18 GHz. This is the highest output power density obtained for an InGaAs based transistor on InP at K-band. Record output power densities for an InGaAs MISFET were also demonstrated to the stable within 3% over 17 hours of continuous operation at 18 GHz.< <ETX xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">></ETX>
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: IEEE Transactions on Microwave Theory and Techniques
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
