Abstract

The main goal of this research was to propose a new method of polarimetric SAR data decomposition that will extract additional polarimetric information from the Synthetic Aperture Radar (SAR) images compared to other existing decomposition methods. Most of the current decomposition methods are based on scattering, covariance or coherence matrices describing the radar wave-scattering phenomenon represented in a single pixel of an SAR image. A lot of different decomposition methods have been proposed up to now, but the problem is still open since it has no unique solution. In this research, a new polarimetric decomposition method is proposed that is based on polarimetric signature matrices. Such matrices may be used to reveal hidden information about the image target. Since polarimetric signatures (size 18 × 9) are much larger than scattering (size 2 × 2), covariance (size 3 × 3 or 4 × 4) or coherence (size 3 × 3 or 4 × 4) matrices, it was essential to use appropriate computational tools to calculate the results of the proposed decomposition method within an acceptable time frame. In order to estimate the effectiveness of the presented method, the obtained results were compared with the outcomes of another method of decomposition (Arii decomposition). The conducted research showed that the proposed solution, compared with Arii decomposition, does not overestimate the volume-scattering component in built-up areas and clearly separates objects within the mixed-up areas, where both building, vegetation and surfaces occur.

Highlights

  • Introduction iationsNowadays, satellite data are one of the main sources of information about Earth’s surface and processes that occur in the environment

  • The analysis presented in this work focuses on the problem of polarimetric Synthetic Aperture Radar (SAR) data decomposition procedures [4]

  • The number of kernel calls is significantly lower than the number of iterations in the computing processing units (CPU) version of the algorithm

Read more

Summary

Introduction

Introduction iationsNowadays, satellite data are one of the main sources of information about Earth’s surface and processes that occur in the environment. A multitude of environmental phenomena that can be studied from above is ensured thanks to a broad spectrum of different kinds of devices and systems that are placed on satellites One of those systems is synthetic aperture radar (SAR) [1]. SAR saves information about the amplitude (Am ) and the phase (φ) of the returning signal for each pixel of generated radar image. Those parameters are used in the most widely known methods of SAR data processing: InSAR (interferometry SAR) [2], DInSAR (differential interferometry SAR) [2] and PSI (permanent/persistent scatterers interferometry) [3]. The first mentioned method, InSAR, is used to generate digital elevation models (DEMs), and Licensee MDPI, Basel, Switzerland

Objectives
Methods
Results
Conclusion
Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call