Influences of Zero Mass Flux and Active Conditions on the Predictions of Double Dispersion and Double Diffusive Boundary Layer in Darcy/Non Darcy Nanofluid Flow

Abstract

Free convective of nanofluid inside dispersive porous medium adjacent to a vertical plate under the effects of the zero mass nanoparticles flux condition and the thermal and solutal dispersions is studied. Buongiorno's model revised is used considering Darcy and non Darcy laminar flows, and isothermal or convective flux outer the wall. Dimensionless governing equations formulated using velocity, temperature, concentration and nanoparticle volume fraction have been solved by finite difference method that implements the 3-stage Lobatto collocation formula. The numerical data obtained with semi or full dispersions cases are compared to predictions made using the non dispersive porous medium. Taking into account the dispersions, the influence of the zero mass nanoparticles flux condition is examined to test the validity of the control active nanoparticle assumption. It is found mainly that the thermal transfers can reach more than 100% in connection with the case where of a semi-dispersion of the porous medium is applied. Realistic condition, i.e. zero mass flux should be addressed for the heat transfer rate rather than the mass transfer rate, discovered markedly different to the active condition. This signifies the importance of considering the zero nanoparticles mass flux and dispersions in the performance characterization of nanofluid flow in porous media.