Abstract
Friction stir welding (FSW) is capable of joining dissimilar materials. In FSW, a rotating shoulder with a profiled pin moves between sheets of the pieces to be joined. As the rotating tool travels along the weld line, frictional heat is generated between the base material and tool shoulder. This heat is however lower than in fusion welding methods. In this work the influences of the tool shoulder diameter (one of the heat generation source) on the macrostructure, microstructure and tensile properties of the dissimilar AA6061 Aluminum and AZ31 Magnesium alloys were experimented. From this investigation, it was found that the joints fabricated using a shoulder diameter of 21mm (3.5 times the plate thickness) exhibited superior tensile properties compared to its counterparts.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.