Influences of Sr-Incorporated TiO2 Layer on the Photovoltaic Properties of Dye-Sensitized Solar Cells.

Abstract

Effects of a mixed overlayer composed of TiO2 and TiSrO3 on the performance of dye-sensitized solar cells (DSSCs) were investigated. The surface of TiO2 photoelectrode formed on F-doped SnO2 (FTO) was modified by soaking it in a TiCl4:SrCl2 mixed aqueous solution with various molar ratios and then calcining to produce the TiCl4:SrCl2-treated TiO2 photoelectrode (Ti:Sr-TiO2/FTO). The highest power conversion efficiency (PCE) was obtained from DSSC with Ti:Sr(7:3)-TiO2/FTO, which was prepared from the mixed solution with the molar ratio of 7:3 (TiOl4:SrCl2). An enhancement in short-circuit photocurrent (J(sc)) and open-circuit voltage (V(oc)) of DSSC with Ti:Sr(7:3)-TiO2/FTO was achieved, compared to those of the reference device with Ti:Sr(10:0)-TiC2/FTO (i.e., TiO2-coated TiO2/FTO). The incorporation of the mixed overlayer on the nanoporous TiO2 photoelectorde led to an improvement in the electron collection efficiency by a prolonged electron lifetime, thereby increasing the J(sc) value. The increase in V(oc) value of the device with Ti:Sr(7:3)-TiO2/FTO was due to the suppression of the charge recombination between injected electrons and I3(-) ions.