Abstract
Sb2S3-sensitized TiO2 films were prepared with chemical bath deposition (CBD) method. The influences of acetone and acetic acid solvents on the morphologies of Sb2S3-sensitized TiO2 films and their light absorbing ability were investigated. Furthermore, photoelectrochemical solar cells containing Sb2S3-sensitized TiO2 photoanodes, polyaniline, and Pt counter electrodes were prepared to investigate the photovoltaic performance of these Sb2S3-sensitized TiO2 films. It was found that the Sb2S3-sensitized TiO2 photoanode prepared with CBD method in the solution containing acetic acid showed higher light absorption in short-wavelength region, lower charge transfer resistance and longer electron lifetime compared with that of the one prepared with CBD method in the solution containing acetone, resulting in better photovoltaic performance.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: Journal of Materials Science: Materials in Electronics
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
