Abstract
In this study, turning of the cemented carbides that their WC particle size was standardized were carried out with the PCD and the cBN tools. The WC particle diameter of cemented carbides was about 2µm and the Co contents were 10, 15, 20 and 25%, respectively. The influence of the WC particle size and Co contents was investigated. Summary of results are shown as follows: (1) In turning with the PCD tool, the more the Co contents increase, the more the tool wear increases. (2) In turning with the cBN tools, the more the Co contents of the work material increase, the more the tool wear decreases. (3) In turning of the cemented carbides contained the larger quantity of Co, the cBN tools are more effective than the PCD tool.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.