Abstract
To evaluate the accuracy of two intraoral scanners (IOS) in terms of different preparation designs and scan angulation limitation due to the presence of adjacent teeth. Eight different complete coverage (CC) and partial coverage (PC) tooth preparations were scanned by two IOS, the 3Shape TRIOS (TRI) and the 3M True Definition (TRU). All teeth preparations were scanned in the presence and absence of adjacent teeth. Four groups were established for each IOS; Group 1: PC preparations with adjacent teeth. Group 2: CC preparations with adjacent teeth. Group 3: PC preparations without adjacent teeth. Group 4: CC preparations without adjacent teeth. 3D analysis was performed to examine average absolute discrepancy (AAD) and maximum absolute discrepancy (MAD). A Two-way ANOVA was performed followed by a post-hoc Tukey's test HSD to evaluate the effect of adjacent teeth, preparation design, and the type of IOS used. For TRI, AAD for groups 1, 2, 3, and 4 were 20 ± 1.8 µm, 19.6 ± 2.4 µm, 15.5 ± 2.7 µm, and 12.9 ± 1.4 µm, respectively, whereas MAD for groups 1, 2, 3, and 4 were 109.7 ± 13.5 µm, 93.2 ± 28.9 µm, 85.6 ± 16.1 µm, and 66 ± 20.1 µm, respectively. For TRU IOS, AAD for groups 1, 2, 3, and 4 were 22.0 ± 3.6 µm, 17.9 ± 2 µm, 20 ± 5.9 µm, and 14.9 ± 1.7 µm, respectively, whereas the MAD for groups 1, 2, 3, and 4 were 151.4 ± 38.4 µm, 92.2 ± 17. µm, 92.6 ± 23.6 µm, and 71.4 ± 11.9 µm, respectively. Two-way ANOVA showed statistically significant differences between the AAD and MAD of TRI and TRU (p < 0.001). There were also statistically significant differences for presence or absence of adjacent teeth (p < 0.001), and preparation design (p < 0.001). PC preparation scans revealed lower accuracy than CC. The presence of adjacent teeth decreased the accuracy of both IOS. TRI gave higher accuracy than TRU for PC, but both IOS showed comparable accuracy for CC groups.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.