Abstract
In the present research, the influence of friction stir welding (FSW) tool material on the mechanical and microstructural properties of friction stir (FS) welded 316L stainless steel butt joints is investigated. FS welds were produced using two different tungsten based FSW tools having identical tool shoulder and pin profiles. In both the cases, the FSW experimental runs were carried out using tool rotational speed of 600rpm, welding speed of 45mm/min, axial force of 11kN and tool tilt angle of 1.5°. The results of the study show that the joints produced using the tungsten lanthanum oxide tool are having superior mechanical and microstructural properties when compared to the joints produced using tungsten heavy alloy tool. Furthermore, the tool degradation study by mass loss and photographic techniques suggests that the tungsten lanthanum oxide tool is more prone to degradation by plastic deformation, whereas the tungsten heavy alloy tool is more prone to degradation by wear.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: International Journal of Refractory Metals and Hard Materials
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
