Abstract
The carbon reinforced silicon carbide ceramic matrix composites (C/SiC) were brazed to Fe-Ni-Co superalloy (GH783) with Cu-Ti + Mo solder under vacuum at 1000 °C. The influence of thermal shock (in air at 800 °C) and environment temperature on mechanical properties of the joint were investigated. The joint between C/SiC composites and GH783 was dense, crack free, and was comprised of reaction layer, stress relief layer, plastoelastic layer, and diffusion layer. Thermal shock damage and oxidative damage were both existing after the thermal shock. Therefore, the flexural strength of the joint decreased dramatically with the increase of thermal shock times. After 5, 10, and 15 times of thermal shock, the flexural strength of the joint decreased to 42.9, 22.7, and 9.7% of the initial strength, respectively. The flexural strength of the joint decreased dramatically with the increase of environment temperature because of the thermal mismatch between C/SiC and the interface reaction layer. The flexural strength of the joint at 600, 800, and 900 °C was decreased to 60, 39, and 29% of that at room temperature, respectively.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
