Abstract
This paper presents results of investigations on the influence of the rise rate of voltage and the leakage distance (Lf) on flashover gradient (FOG) and partial discharges (PD) activity on insulators issued of different polymers materials in dry conditions; the aim of this study being the development of new generation of high voltage piercing connectors. The investigated polymers are of three distinct classes among the mostly used in electrical industry: thermoplastics, thermosetting and elastomers. The considered thermoplastics are polyamide 6 (PA6/50), fireproofed polyamide 66 (PA66/50), polycarbonate (PC/40) and polyarylamide (PARA/50); the thermosetting are two cycloaliphatic epoxy resins (EP1 and EP2); and as concerns elastomers, two EPDM materials noted EPDM and EPDM V0 (fireproofed) have been tested. It is observed that generally the increase of the rise rate of voltage increases the flashover gradient while the increase of leakage distance leads to the decrease of flashover gradient. The magnitude and time duration of voltage, chemical structure of polymer and leakage distance influence the magnitude of PDs. Small degradations are observed in the vicinity of high voltage electrode for thermoplastics and EPDM elastomers after the occurrence of flashover (arc) especially for PC/40. The surface of cycloaliphatic epoxy resins (EP1 and EP2) appears to be the most resistant to flashover arcs and PD activity making them suitable to be used in high voltage connectors.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: IEEE Transactions on Dielectrics and Electrical Insulation
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.