Abstract
The aim of the present work is to study the influence of the precipitation temperature in the synthesis of nanohydroxyapatite (n-HAp) on the properties of the resulting n-HAp powder for the fabrication of highly porous scaffolds for bone tissue engineering. The n-HAp powder was obtained by a wet precipitation technique starting from calcium nitrate tetrahydrate (Ca (NO3)2*4H2O) and phosphoric acid (H3PO4) at different temperatures: 10°C, 37°C and 50°C. Highly porous scaffolds were fabricated using the three different powders by the sponge replica method and sintering at 1300°C. Combined X-ray diffraction (XRD) and transmission electron microscopy (TEM) analyses on powders indicated that on increasing the precipitation temperature the formation of pure n-HAp is accelerated, without significant changes in particles morphology and size. Scaffolds characterized by high porosity (89%) and good compressive strength (0.53 MPa for n-HAp prepared at 37°C) were obtained. XRD analyses on sintered n-HAp confirmed the thermal stability of the material. Therefore, the as-synthesized n-HAp powder can be successfully used for the fabrication of highly porous scaffolds as bone substitutes.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have