Abstract
Hot recycling of reclaimed asphalt pavement (RAP) into new hot-mix asphalt (HMA) is a complex process that must be precisely calibrated in the asphalt plants. In particular, temperature is a key parameter that, if inadequately set, can affect the final mix performance as it influences the RAP binder mobilization rate and the severity of bitumen short-term aging. The present paper aims at evaluating the effect of HMA production temperature on the behavior of mixtures including 50% of RAP and two types of rejuvenating agents. In particular, volumetric, mechanical, chemical, and rheological properties of the mixes and binder-aggregate adhesion have been investigated on the HMA produced in the laboratory at 140 °C or 170 °C. The results showed that the adoption of a lower production temperature did not significantly influence the air voids content in the mix, but determined a less stiff, brittle and cracking-prone behavior. Moreover, the decrease of the HMA production temperature was profitable for the increase of bitumen-aggregate adhesion.
Sign-in/Register to access full text options 
Free) 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call
