Influence of the final ethanol concentration on the acetification and production rate in the wine vinegar process

Abstract

AbstractBACKGROUND: The acetification process needs an overall study of the variables influencing it in order to establish their optimum values. Based on industrial experience and available literature, including a recently proposed model by the authors, among the variables most strongly influencing the acetification process are the ethanol concentration at the time the reactor is unloaded, the unloaded volume and the loading rate. To ensure economically efficient industrial production of vinegar, and to check the predictions of the aforementioned model, the influence of the final ethanol concentration at unloading time on the mean acetification rate and on productivity has been studied in this work.RESULTS: An increase in the final ethanol concentration from 0.5 to 3.5% (v/v) increased the mean overall acetification rate and acetic acid production by 38 and 26%, respectively. The increase was established mainly during the loading phase.CONCLUSIONS: The final ethanol concentration is a key variable for process optimization. If a high rate is desired then a product containing much unused substrate will be obtained, which may be industrially unacceptable. These results suggest the necessity to investigate other possibilities when high values for yield and productivity must to be achieved. Copyright © 2010 Society of Chemical Industry