Influence of the Diameter Size on the Deformation and Failure Mechanism of Shield Precast Segmental Tunnel Lining under the Same Burial Depth

Abstract

With the development of large-diameter shield tunnels, how to realize effective security and stability control of shield tunnel lining has become a significant research topic. This paper investigates the deformation and failure mechanism of lining large diameter shield tunnels in depth and discusses the deformation characteristics and influencing factors of the lining of the shield tunnel with various diameters through the software of finite element analysis ABACUS. A set of models with varying diameters is built under identical stress conditions in order to maintain control over the variable. The utilization of the elastic–plastic model is observed in the application of bolts and rebar. The utilization of the Concrete Damage Plasticity model has been taken into account for the concrete lining. For the sake of comparison, the crown displacement of the shield tunnel, strain in tension and compressive zones, bolt stress and strain, deformation and intemal force distribution around the shield tunnel, and cracks in the tension zone, are carefully studied. An in-depth analysis is conducted to elucidate the variations in damage evolution mechanisms across linings of different sizes, within the framework of plastic hinge theory. The results indicate that the convergence deformation of large-diameter tunnel lining increases significantly during loading compared with that of small-diameter tunnel. Moreover, the probability of brittle failure is higher in big-diameter shield tunnels compared to small-diameter tunnels, indicating that these larger tunnel structures are more prone to suffering geometric instability.