Abstract

Abstract The aim of this work was to evaluate the influence of the chemical structure of carboxymethylcellulose (CMC) on the rheological performance and fluid loss of clay dispersions. The dispersions were prepared with a fixed content of bentonite clay (15 g/350 mL of water) and different concentrations of CMCs (0.5, 1.0, 2.0 g/350 mL of water). After aging for 24 h in ambient and static conditions, the dispersions were tested in a viscometer. Apparent and plastic viscosities, yield point and gel strength were obtained using the viscometer, according to Petrobras’ standard (EP-1EP-00011-A). The filtrate volume was determined using the API filter press. The results showed that the addition of long chain, low degree of substitution and lower substitution uniformity of CMC contribute to the flocculation phenomenon. In addition, the different chemical characteristics of CMC only influence fluid loss when the ionic strength of the dispersion is set to any other value than zero.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.