Influence of the charging pressure of the hydraulic pneumatic accumulator of the communal machine control device on the pressure force of the brushed working body

Abstract

The article is devoted to the actual problem of increasing the efficiency of cleaning the roadway with a communal machine. To increase the cleaning efficiency, it is necessary to provide the required pressing force and thus the required area of the contact spot between the brush pile and the surface to be cleaned, which can be done by using a position control device for the brush working equipment.Research methods. In the process of research were used the following methods: analysis, synthesis, ascent from the abstract to the concrete. The results of the study of the influence of the parameters of the control device on the criterion of the efficiency of the working process of the communal machine are presented.Results. As a result of the analysis of the process of interaction of the brush working equipment with the surface being cleaned, the dependences connecting the standard deviation of the pressing force of the brush working equipment to the surface to be cleaned from the required value, taking into account the wear of the pile and the charging pressure of the hydraulic pneumatic accumulator, were revealed, their approximation was carried out, and the regression equation was obtained.Conclusions. The studies carried out made it possible to obtain regression equations which are used to determine the optimal value of the standard deviation of the pressing force from the required one for different degrees of wear of the pile, depending on the charging pressure of the hydraulic pneumatic accumulator. The research results can be applied in the design of automatic control systems for the position of the working bodies of construction and road machines.