Abstract
Reactive air brazing (RAB) is a cost‐effective way to produce ceramic–ceramic or ceramic–metal brazed joints in air, without applying a protective gas atmosphere or a vacuum. In addition to conventional furnace technology, the brazing with induction heating can also be used effectively. Within the scope of this study the shrinkage and wetting behavior of self‐developed brazing pastes with different CuO contents and two qualities of silver powders with coarse and fine particle size are investigated by optical dilatometry on alumina (Al2O3, 99.7% purity). Thereby, the fine silver powder quality reveals a significant swelling effect at high temperatures, leading to an expansion of densified powder compacts caused by evolving gases. Joining tests are performed on ceramic–steel brazed joints using a muffle furnace and induction heating for short brazing cycles. The brazing seams and interfaces of the joints are investigated using scanning electron microscopy (SEM) and energy‐dispersive X‐ray spectroscopy (EDS). As a result, correlations between the brazing filler metal composition, the steel, and the brazing conditions are obtained.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
