Influence of tensile stress on the magnetic flux leakage signal of the coated steel belt

Abstract

ABSTRACT The safety of coated steel belts (CSBs) is crucial for reliable elevator operation, as they are critical components in elevator systems. Magnetic flux leakage (MFL) testing is the preferred non-destructive method for evaluating CSBs due to its high sensitivity. Previous studies overlooked tensile stress's impact on in-service MFL testing of CSBs, potentially resulting in inaccurate defect assessments. This research aims to investigate the impact of tensile stress on the MFL signal of CSBs by developing a theoretical model, conducting finite element simulations, and performing experimental verification. In this paper, the rectangular edge defects are considered as the primary defect type in CSBs, and the applied stress on the CSBs varies from 30 MPa to 160 MPa. Under the above conditions, a linear relationship between MFL signal of CSBs and stress is established based on the simplified Jiles-Atherton model and magnetic dipole model suitable for CSBs. The finite element simulation and experiments further indicate that the MFL signal of CSBs increases linearly with the increasing tensile stress. The primary contributions of this study are establishing an MFL model suitable for CSBs and uncovering the linear relationship between the MFL signal of CSBs and tensile stress.