Influence of tempering temperature on both the microstructural evolution and elemental distribution in AISI 4340 steels

Abstract

In the present study, the influence of tempering temperature on the microstructural evolution and prior austenite grain boundary segregation of AISI 4340 steels was investigated by transmission electron microscope and atom probe. The transmission electron microscopy results showed a variation in the microstructure and the morphology of carbides with a change in tempering temperature. Additionally, the chemical compositions of the prior austenite grain boundaries and carbides were quantified by atom probe tomography. An increase in the tempering temperature led to a decrease in the amount of carbon segregated at the prior austenite grain boundary from 7.9 to 1.3 at.%. It was found that a higher tempering temperature can accelerate the diffusion of carbon from the prior austenite grain boundary into carbide. However, phosphorus atoms were segregated mainly at the prior austenite grain boundary in steel tempered at 400°C (up to 0.18 at.%). It was found that formation of film-like carbide and phosphorus segregation along the prior austenite grain boundary is the main cause of embrittlement in steel tempered at 400°C.