Abstract
Pure phase, zinc ferrite (ZnFe2O4) nanoparticles were synthesized at lower temperature (80 °C) by auto combustion synthesis method. The resulting ‘as synthesized’ powder was heat treated (HT) at 560 °C for 2 h in air atmosphere. As-synthesized particles had sizes ~10 nm with spherical shape. Further, these spherically shaped nanoparticles tended to change their morphology to hexagonal plate shape with increasing HT temperature. The band gap of the ‘as synthesized’ and HT zinc ferite, as determined by using UV–Vis spectroscopy were found to be 1.92 and 1.86 eV respectively. Gas responses of the ZnFe2O4 nanoparticles were measured by exposing them to ethanol gas vapors. It was found that the zinc ferrite nanoparticles exhibited various sensing responses to ethanol gas at different operating temperature. The best sensitivity was observed at low temperature for ‘as synthesized’ ferrite nanoparticles than HT zinc ferrite nanoparticles. Sensing material that had smaller particle size and larger specific surface area was observed to have larger gas sensitivity and vice-versa.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.