Abstract
8YSZ material that has high electrical conductivity is widely used as electrolytes for solid oxide fuel cells (SOFCs). But its low strength and low fracture toughness hampered the development of SOFCs. In order to find a best method to improve the capability of YSZ electrolyte, the effects of 3Y-TZP additive on the density, strength, conductivity and microstructure were studied by means of X-ray diffraction and Vicker's hardness apparatus. The strength and conductivity of YSZ electrolyte doped with different amounts of 3Y-TZP were determined. It is shown that the samples sintered at 1450 °C for 2 h are the best in properties. When 3Y-TZP powders are added to the YSZ system, the results demonstrate that strength of the electrolyte increases remarkably, and the fracture toughness is improved. The electrical conductivity is lowered only slightly. The results display that the flexural strength and the fracture toughness of ceramics with 30wt. % TZP reach 300 MPa and 3.7 MPa·m 1/2, respectively, and the conductivity at 1000 °C reaches 0.11 S·cm −1.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
