Abstract
Interfacial interaction in zeolite filled polymer composites was investigated in this study. Two types of polymer which are polypropylene (PP) and ethylene vinyl acetate (EVA) were used as matrix in the preparation of the composites. Moreover, different modifications of zeolite filled polymer composites such as zeolite surface treatment with vinyl silane and alkylammonium and also chemical crosslinking were done to improve the interfacial adhesion between zeolite and polymer matrix. The zeolite filled polymer composites were homogenized using Thermo Haake Polydrive internal mixer and then compression molded into sheets according to standard test specimen. Uniaxial tensile test was performed in order to evaluate the mechanical behavior of the composites. The obtained experimental data for ultimate stress was correlated with Pukanszky theoretical model. The experimental results for all systems of zeolite filled polymer composites showed a good fit to the Pukanszky model. Interfacial interaction for each system of zeolite filled polymer composites was theoretically evaluated by determining the parameter B through this model. The value of parameter B for all zeolite filled polymer composite systems differs significantly from one another thus suggesting the applicability of this Pukanszky model in characterizing the filler-matrix interfacial adhesion.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
