Abstract
Internal curing with superabsorbent polymers (SAP) is a method for promoting hydration of cement and limiting self-desiccation, shrinkage and cracking in high-performance, and ultra high-performance concrete with low water-to-binder ratio. SAP are introduced in the dry state during mixing and form water-filled inclusions by absorbing pore solution. The absorbed solution is later released to the cement paste during hydration of the cement. In this paper, cement pastes with low water-to-binder ratios incorporating superplasticizer and different dosages of SAP and corresponding additional water were prepared. Reference cement pastes without SAP but with the same amount of water and superplasticizer were also mixed. Isothermal calorimetry was used to measure hydration heat flow. Water entrainment by means of SAP increased the degree of hydration at later hydration times in a manner similar to increasing the water-to-binder ratio. Addition of SAP also delayed the main calorimetric hydration peak compared to the reference pastes, however, in a less prominent manner than the increase in water-to-cement ratio.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.