Abstract
Transparent and conductive aluminium-doped zinc oxide thin films have been prepared by dc magnetron sputtering technique using targets composed of ZnO and aluminium. Polycrystalline ZnO:Al films were deposited onto a heated glass substrate. Surface morphology and crystalline structure as well as optical and electrical properties of the deposited films were found to depend directly on substrate temperature. From optical and electrical analysis it was observed that optical transmittance and conductivity of the ZnO:Al transparent conductive oxide films increased when the deposition temperature was raised from 200 to 400 o C. Films grown on substrates heated at 300 o C showed a high conductivity value of 0.2 x 10 2 Ω -1 cm -1 and a visible transmission of about 80%. The growth of ZnO:Al thin films on the surface of glass substrate at temperatures of 300 o C and aluminium doping levels of 0.9 at.% were the best to attain ZnO:Al films with optical and structural qualities as required for solar cell applications, as a window material in antireflection coatings or optical filters. Received: 17 March 2009; Revised: 22 November 2009 ; Accepted: 23 November 2009
Sign-in/Register to access full text options 
Free) 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call
