Abstract

In this study, YSZ coatings were deposited on different substrate materials (stainless steel and aluminum) using suspension plasma spray technique. The effects of substrate properties (material, surface topology, temperature, and thickness) on the formation of coatings were investigated. The results showed that, with the identical spray parameters, the porosity is higher for the coatings deposited on aluminum than that on stainless steel due to the high thermal transfer ability of the former substrate material. The SEM results revealed that the microstructure of as-prepared coatings could be tailored from the vertical cracked structure to the columnar structure by increasing the substrate surface roughness and their formation mechanisms were discussed. The substrate preheating temperature has an influence on the microstructure of the coatings, especially in the interfacial region. Increasing the substrate temperature is an effective means for reducing the interface defects and for improving the adhesion of the coatings. With the increase in the substrate thickness, the quantity of the vertical cracks in the coatings is reduced and their width becomes narrower.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call