Influence of stress level and damage on sonic tomography imaging and on the estimation of deformability properties of historic stone masonry

Abstract

The paper evaluates the sensitivity of sonic tomography imaging of historic masonry structures to variations in stress level and damage. Six stone masonry walls with different geometries representative of historical typologies were constructed by a professional mason. A laboratory campaign was carried out, subjecting the walls to cyclic uniaxial compression tests. During the test, an automated sonic tomography system was used to inspect the wall under loading cycles of increasing amplitude, which led to obtain tomographic images during loading and compare them under different stress level and damage condition. The use of robotic systems was proved essential to carry out the sonic inspections simultaneously to the compression tests. Results show that sonic wave propagation is not only sensitive to damage level, but also to the stress state. Thus, sonic tomography has the potential to be used to measure damage and stress level of masonry components over time, for example during renovation works on an existing construction.