Abstract
Fatigue crack growth rate in carbon pipeline steel was studied in aqueous corrosion solution when the passive film formation occurs on the metal surface due to the presence of sodium nitrite admixtures of different concentration. The passive film strength was evaluated as the characteristic value of stress intensity factor KI*, which corresponds to the passive film failure in the crack tip. For determination of parameter KI* the special experimental procedure was developed and verified. It was found that dependence of KI* on the concentration of passivation component in the environment is ambiguous and some maximum value of KI* is observed. The fatigue tests and hydrogen permeation study showed that under these conditions the formed passive film is the most resistible against electrochemical hydrogen absorption that provides the maximal deceleration of fatigue crack growth rate.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.