Abstract

Many researchers studying copper chemical mechanical planarization (CMP) have been focused on mechanisms of copper removal using various chemicals. On the basis of these previous works, we studied the effect of slurry components on uniformity. Chemical mechanical planarization of copper was performed using citric acid (C 6H 8O 7), hydrogen peroxide (H 2O 2), colloidal silica, and benzotriazole (BTA, C 6H 4N 3H) as a complexing agent, an oxidizer, an abrasive, and a corrosion inhibitor, respectively. As citric acid was added to copper CMP slurry (pH 4) containing 3 vol% hydrogen peroxide and 3 wt% colloidal silica, the material removal (MRR) at the wafer center was higher than its edge. Hydrogen peroxide could not induce a remarkable change in the profile of MRR. Colloidal silica, used as an abrasive in copper CMP slurry containing 0.01 M of citric acid and 3 vol% of hydrogen peroxide, controlled the profile of MRR by abrading the wafer edge. BTA as a corrosion inhibitor decreased the MRR and seems to control the material removal around the wafer center. All the results of in this study showed that the MRR profile of copper CMP could be controlled by the contents of slurry components.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call