Abstract
The influence of sintering atmosphere and copper addition on the microstructural and piezoelectric properties of Mn -doped lead zirconate titanate ceramics (PZT) was investigated. This ceramic powder densifies below 1000°C, enabling the use of copper inner electrodes for a multilayer actuator setup. To simulate the influence of oxidized inner electrodes during sintering, different CuO contents (0 and 1 mol.%) were mixed to the precalcined Mn -doped PZT powder. Ceramic discs were sintered at 950°C in air and analogously in N2 , or in steam containing N2 (25 vol.% water vapor content). The electrical characterization of the discs showed that the piezoelectric properties are influenced by the CuO addition as well as by the sintering atmospheres. The large signal piezoelectric constant [Formula: see text] shows an improvement of at least 20% when CuO is added. CuO acts as a sintering aid, and especially when the ceramics are fired in steam-containing N2 , anomalous grain growth occurs.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
