Abstract
Abstract In the present work, the effect of a few important process parameters like shoulder diameter, plunge depth, welding speed, rotational speed on the tensile behavior, namely flow strength, elongation, and hardness are studied. The relation between the thickness gradient of friction stir welded (FSW) sheets developed during the forming and strain hardening exponent of weld zone and elongation improvement has been explored. Micro-hardness showed a decreasing trend, from the base material to the centre of the nugget zone, except near the transition zone. With increase in shoulder diameter and welding speed, hardness has increased. However, with increase in plunge depth and rotational speed, hardness has decreased. The plunge depth effect on hardness distribution is negligible. The FSW sheets showed a decreased flow stress and improved elongation when compared to base material. The overall elongation of FSW sheets and weld zone has improved with increase in plunge depth, shoulder diameter, and rotational speed in most of the cases, while welding speed has shown insignificant effect. The thickness gradient is found to be severe in un-welded blanks as compared to FSW blanks. With increase in shoulder diameter, plunge depth, and rotation speed, the thickness gradient is found to decrease, while welding speed showed negligible effect. With improvement in strain hardening exponent of FSW sheets and weld zone with respect to changing welding conditions, the thinning gradient has reduced improving the overall elongation of welded sheets in most of the cases.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.