Abstract
Solid polymer electrolytes containing methylcellulose:dextran (MC-DEX), ammonium hexafluorophosphate (NH4PF6), and glycerol have been prepared via the solution cast method. Various techniques have been used to characterize the prepared electrolyte samples. Fourier transform infrared spectroscopy (FTIR) analysis revealed the interaction between polymers and electrolyte components. According to the electrical impedance spectroscopy (EIS), the highest conducting plasticized system achieves a conductivity of 6.71 × 10-4 S cm−1 at ambient temperature. The mobility, number density, and diffusion coefficient of ions were measured using both FTIR and EIS methods, and it was found that their values rise as the amount of glycerol increases. Polarization due to ion migration is responsible for the high value of dielectric parameters. According to transference number measurement (TNM), the transport ion (tion) is 0.92, verifying that the ions are the primary charge carriers. The electrochemical stability window of the maximum conducting plasticized system is 1.58 V, based on linear sweep voltammetry (LSV) analysis. The electrical double-layer capacitor (EDLC) device is fabricated using the highest conducting plasticized system. The cyclic voltammetry (CV) curve is roughly rectangular in shape and with no presence of Faradaic peaks with its specific capacitance of 32.69F/g at 10 mV/s.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.