Influence of Rolling Temperature on the Mechanical Properties and Microstructure of Variable-Plane-Rolled Mg-3Al-1Zn Alloy

Abstract

AZ31 magnesium alloy was produced via variable-plane rolling (VPR) under different temperatures. The effects of rolling temperature on the microstructure, texture and mechanical properties were investigated. A double-peak basal texture was formed during VPR treatment. Dynamic recrystallization (DRX) was observed during the VPR treatment, and it can reduce the texture intensity owing to the coalescence of sub-grains. Four types of twins were observed in the VPR treatment: {10-12} extension twins, {10-13}, {10-11} contraction twins and {10-11}-{10-12} double twins. The suitable temperature of AZ31 magnesium alloy for VPR treatment is determined as 623 K through experiments with tensile yield strength of 240 MPa, compressive yield strength of 162 MPa and elongation of 13%. Owing to the important impact of temperature on mechanical properties, the alloy was further VPRed with a decrease in temperature pass-by-pass. The high temperature of 623 K at the initial passes randomized the texture, which led to notably high ductility.