Abstract
Zircon matrix composites, uniaxially reinforced with a variety of SiC fibres were fabricated in order to create composites with different interfacial properties. Interfacial properties were varied by changing the nature of fibre coatings. The effect of changes in interfacial shear strength on important matrix properties, such as hardness and fracture toughness, was studied on a micro-scale using the microindentation technique. In addition, the relative orientation of the indented cracks with respect to the fibres was varied to investigate the existence of anisotropic behaviour of the matrix. The results indicated that the crack growth in the matrix was influenced by the presence of residual radial and axial stresses, such that relatively higher crack lengths were seen in certain directions in the matrix with respect to other directions. This asymmetric nature of the crack formation upon indentation was the reason for the observed anisotropic fracture toughness of the matrix. The residual stresses also led to anisotropic hardness and a critical load for crack initiation in the matrix.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
