Abstract

The purpose of this study was to investigate the influence of relative humidity (RH) on the mechanical and dissolution properties of theophylline pellets coated with Eudragit ® RS 30 D/RL 30 D containing methylparaben (MP) as a non-traditional plasticizer. The coated beads were stored at 23°C and at different relative humidities (0, 29, 51, 75 and 84% RH). The effect of storage conditions on the rate of drug release from coated beads was determined in pH 7.4 phosphate buffer solution. The mechanical properties, including tensile strength and Young’s modulus, of individual beads were determined by a diametral compression method with a Chatillon ® tension/compression apparatus. The morphology of the intact and fractured beads was investigated using scanning electron microscopy (SEM). The moisture content of the polymeric films was determined using a Karl Fischer coulometric moisture analyzer. The results from the mechanical studies demonstrated that an increase in the relative humidity resulted in a decrease in the tensile strength and Young's modulus of the coated beads. SEM photographs showed that coated beads stored at 0% RH exhibited brittle fracture failure. The coated beads stored at 84% RH showed ductile behavior, which was attributed to the hydroplasticization effect on the acrylic polymer due to the uptake of moisture. The moisture content in the films was also shown to influence the rate of drug release from Eudragit ® RS 30 D/RL 30 D coated beads containing MP as the plasticizer. The change in release profiles could be minimized when the relative humidity was reduced to zero. The dissolution rate of theophylline from the coated beads decreased when stored at high relative humidities. This trend was reversed when the coated beads that were stored at 84% RH for 5 weeks, were then equilibrated at 0% RH.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call